Menu
Our favorite question. Answer: Spray foam is the only insulation material that is created directly at the job site by combining two chemical components. To produce a stable, inert material, those components must be mixed at a precise 1:1 ratio by volume. That precision is why equipment matters. At Cloud9 Spray Foam, we use advanced computer-controlled equipment to monitor and regulate the chemical mixing process in real time during installation. This technology brings factory-level process control to the job site — similar to the quality-control systems used in factories that produce many of the plastics that surround us. All production data is recorded and uploaded to secure third-party servers in real time, giving our customers clear documentation and peace of mind that your spray foam was installed with the proper chemical ratio and curing conditions.
Answer: Closed-cell spray foam is denser, more rigid, and commonly used where higher R-value, air sealing and moisture resistance are important. Open-cell spray foam is softer and often used for rooflines, attics, walls and areas where air sealing and sound absorption are priorities. Open-cell spray foam is a considerably cheaper choice. So, when moisture is not an issue and sound attenuation is not a major concern Open-cell spray foam can be a great choice. Call us for a no-charge consultation.
Answer: It depends on the project. Closed-cell foam is usually better for crawl spaces, rim joists, basements and areas where moisture resistance or higher R-value per inch is needed. Open-cell foam can be a good choice for rooflines, attics and sound-sensitive applications. Open Cell spray foam is notably cheaper, so if the insulating area is dry and there is sufficient space to apply open-cell spray foam it is a preferred choice. Attics, floors over garages and mid-floors that need to be soundproofed are just a few of many good applications for open-cell spray foam. We will be happy to provide an advice at no charge.
Answer: Yes. Cloud9 Spray Foam is a licensed insulation contractor based in Norwalk, CT, serving Fairfield County. We install closed-cell and open-cell spray foam in attics, crawl spaces, basements, rim joists, walls, garages, additions, renovations, new construction and commercial properties.
Answer: In most occupied homes people and pets stay out of the spray area during installation and curing and may re-enter the home 24 hours after we stop spraying. Re-entry timing depends on the product, ventilation, job size and site conditions. We review this with the customer before the project. But a good rule of thumb for occuped homes, 24 hours after we stop spraying.
Answer: Yes. We install attic insulation using spray foam, blown-in cellulose, fiberglass and mineral wool depending on the home, access, code requirements and project goals. Attic insulation can improve comfort, reduce drafts and help lower heating and cooling costs.
Answer: Yes. Spray foam can be installed at roof rafters or rooflines when the assembly is designed correctly. This is commonly used in finished attics, additions, cathedral ceilings and certain unvented attic assemblies or when retrofitting existing attics. This is the highest value added upgrade option for pre-existing homes.
Answer: Yes. We insulate crawl spaces using closed-cell spray foam and other appropriate materials. Crawl space insulation and air sealing can help reduce cold floors, drafts, moisture concerns and energy loss from below the home.
Answer: Yes. Rim joists are one of the most common areas for air leakage and heat loss. We often use closed-cell spray foam at rim joists because it provides insulation and air sealing in one application.
Answer: Yes. Cloud9 Spray Foam is an approved Energize Connecticut insulation contractor. We can help eligible homeowners understand available insulation rebate opportunities and complete qualifying insulation upgrades when the project meets program requirements. We handle all the paperwork.
Answer: Energize Connecticut rebate amounts and eligibility requirements can change. We can help homeowners review current insulation rebate opportunities and determine whether their project may qualify under the program rules.
Answer: For many Energize Connecticut insulation rebate projects, the work must be completed by an approved contractor. Cloud9 Spray Foam is an approved contractor under the program and can help with qualifying insulation upgrades.
Answer: Yes. We provide soundproofing insulation using Rockwool, mineral wool, open-cell spray foam and air-sealing methods. Good sound control usually requires both cavity absorption and attention to gaps, penetrations and sound leakage paths.
Answer: Yes. Rockwool and mineral wool are commonly used for sound-control applications because they provide dense fibrous cavity absorption. We often use them for interior walls, basement ceilings, offices, mechanical rooms, gyms and media rooms.
Answer: Yes. We install Rockwool and mineral wool insulation for thermal insulation, sound control and certain fire-resistant assemblies. It is commonly used in basements, interior walls, ceilings, mechanical rooms and soundproofing projects.
Answer: Yes. We provide insulation removal for old, damaged, contaminated or poorly installed insulation. Removal is often recommended before new attic insulation, air sealing, spray foam or soundproofing work.
Answer: Yes. We insulate basement walls, basement ceilings, rim joists and mechanical areas using spray foam, Rockwool, mineral wool, fiberglass or other suitable materials depending on the project.
Answer: Yes. We insulate garage ceilings below bedrooms, bonus rooms and living spaces. This can help reduce cold floors, drafts and temperature transfer between the garage and the rooms above.
Answer: We insulate both. Cloud9 works on existing homes, new construction, additions, renovations and commercial properties. We recommend the right insulation approach based on access, framing, code requirements and project goals.
Answer: Yes. We work with homeowners, builders, general contractors, architects, property managers and commercial clients on insulation, spray foam, soundproofing, air sealing and energy-efficiency projects.
Answer: Yes. We install fiberglass batt and blown-in fiberglass insulation where it is the right fit for the project. Fiberglass can be used in attics, walls, ceilings, floors and other framed cavities.
Answer: Yes. We install cellulose insulation for attics and retrofit applications. Blown-in cellulose can be a good option for improving attic insulation levels and filling areas where loose-fill insulation is appropriate.
Answer: Air sealing closes gaps, cracks and penetrations where conditioned air can leak out and outside air can leak in. It is especially important in attics, rim joists, crawl spaces and around penetrations. Better air sealing can improve comfort and energy efficiency
Answer: Yes. We offer blower door testing to help identify air leakage and measure how tight a home or building is. This can be useful before or after insulation and air-sealing work.
Answer: Yes. We use thermal imaging to help identify missing insulation, air leakage, cold spots and temperature differences in the building envelope. It can help diagnose comfort and energy issues before recommending insulation upgrades.
Answer: Common signs include high energy bills, uneven room temperatures, drafts, cold floors, ice dams, hot or cold attic areas, noisy rooms and old or damaged insulation. An insulation inspection can help identify the best solution.
Answer: Insulation and air sealing can help reduce uncontrolled air leakage, drafts and outside air infiltration. Proper material selection, installation quality, ventilation and moisture control all matter for indoor air quality.
Answer: Yes. We can install intumescent coating or other ignition and thermal barrier solutions over spray foam when required by code, product approvals or project scope. Requirements depend on the location and use of the space.
Answer: We evaluate recessed lights and other heat-producing fixtures before spraying. Even with modern IC-rated fixtures, we follow product instructions, code requirements and safe installation practices to avoid covering components that should remain clear.
Answer: The right insulation depends on the area of the home, existing conditions, moisture risk, R-value requirements, access, budget and project goals. Cloud9 installs spray foam, fiberglass, cellulose and Rockwool, so we can recommend the best material for each part of the building.
© Cloud9Home Performance Insulation 2026